share

Type “W” Masking Material

Type “W” Masking Material

A 3 mil, white PVC film designed for use in stencil applications that require a more rigid film. ORACAL 811 has a low-tack, water-based adhesive. It is recommended for water-based paint applications; smooth, flat, rigid substrates and surfaces; and large area capabilities.

SPECIFICATIONS

Features

  • A 3 mil, white PVC film
  • Low-tack, water-based adhesive
  • Recommended for water-based paint applications

Application

Developed for use in paint and stain stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. This is an opaque white paint mask. Great for gymnasium floor paint and stain mask, as well as hobby and craft applications, such as painted drywall, cabinets, custom bag-toss game boards, and wooden home décor signage. Not suitable for wet applications. Remove stencil film prior to baking.

Technical Tips

  • Not suitable for wet applications.
  • Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
  • Users should always test their painting process to ensure stencil films are compatible.
  • Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.

important notice

All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.

A 3 mil, white PVC film designed for use in stencil applications that require a more rigid film. ORACAL 811 has a low-tack, water-based adhesive. It is recommended for water-based paint applications; smooth, flat, rigid substrates and surfaces; and large area capabilities.

SPECIFICATIONS

Features

  • A 3 mil, white PVC film
  • Low-tack, water-based adhesive
  • Recommended for water-based paint applications

Application

Developed for use in paint and stain stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. This is an opaque white paint mask. Great for gymnasium floor paint and stain mask, as well as hobby and craft applications, such as painted drywall, cabinets, custom bag-toss game boards, and wooden home décor signage. Not suitable for wet applications. Remove stencil film prior to baking.

Technical Tips

  • Not suitable for wet applications.
  • Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
  • Users should always test their painting process to ensure stencil films are compatible.
  • Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.

important notice

All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.