share

Type “S” Masking Material

Type “S” Masking Material

This flexible, translucent grey film has been formulated for use in stencil applications, especially spray and paint techniques. It features a solvent-based adhesive for stronger resistance to solvents. ORACAL 810S is ideal for solvent-based paint applications (marine, automotive, etc.); complex, multi-shot and layering paint techniques; and conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces.

SPECIFICATIONS

Features

  • Flexible, translucent grey film has been formulated for use in stencil applications
  • Features a solvent-based adhesive for stronger resistance to solvents
  • Ideal for solvent-based paint applications and complex, multi-shot and layering paint techniques

Application

Developed for use in conformable paint stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the paint mask for substrate visibility. Great for back spraying illuminated sign faces, various automotive, aerospace, industrial equipment paint mask applications. Material is suitable for wet applications. Remove stencil film prior to baking.

Technical Tips

  • Suitable for wet applications to smooth sealed surfaces.
  • Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
  • Users should always test their painting process to ensure stencil films are compatible.
  • Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.

important notice

All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research
which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of
ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and
performance of the product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the
adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and
paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the
unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of
structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The
batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.

This flexible, translucent grey film has been formulated for use in stencil applications, especially spray and paint techniques. It features a solvent-based adhesive for stronger resistance to solvents. ORACAL 810S is ideal for solvent-based paint applications (marine, automotive, etc.); complex, multi-shot and layering paint techniques; and conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces.

SPECIFICATIONS

Features

  • Flexible, translucent grey film has been formulated for use in stencil applications
  • Features a solvent-based adhesive for stronger resistance to solvents
  • Ideal for solvent-based paint applications and complex, multi-shot and layering paint techniques

Application

Developed for use in conformable paint stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the paint mask for substrate visibility. Great for back spraying illuminated sign faces, various automotive, aerospace, industrial equipment paint mask applications. Material is suitable for wet applications. Remove stencil film prior to baking.

Technical Tips

  • Suitable for wet applications to smooth sealed surfaces.
  • Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
  • Users should always test their painting process to ensure stencil films are compatible.
  • Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.

important notice

All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of
merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research
which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of
ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and
performance of the product for each intended use, and the purchaser shall assume all risks regarding such use.
All specifications are subject to change without prior notice.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the
adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and
paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the
unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of
structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The
batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.