share

Type “P” Masking Material

Type “P” Masking Material

ORACAL® 631 is the industry go-to for removable craft vinyl. It is simple to remove from most sealed, smooth surfaces making it perfect for short- to medium-term applications. The luxurious matte finish reduces glare and blends seamlessly with interior walls.

SPECIFICATIONS

Features

  • Transparent clear, water-based, removable adhesive
  • Cricut and Silhouette compatible
  • Effortless cutting and weeding
  • UV-resistant finish
  • For best, long-lasting results hand washing is recommended when applied to mugs, cups, and tumblers.
  • Dry application only

Application

Due to its special release characteristics, this film is ideal for use in short- to medium-term applications indoor, painted drywall surfaces.

important notice

All ORACAL® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORACAL® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORACAL® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Extra precaution should be used when applying wall graphics to “Low VOC” or “Zero VOC” paints as these paints may exhibit lower adhesion levels. Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.

ORACAL® 631 is the industry go-to for removable craft vinyl. It is simple to remove from most sealed, smooth surfaces making it perfect for short- to medium-term applications. The luxurious matte finish reduces glare and blends seamlessly with interior walls.

SPECIFICATIONS

Features

  • Transparent clear, water-based, removable adhesive
  • Cricut and Silhouette compatible
  • Effortless cutting and weeding
  • UV-resistant finish
  • For best, long-lasting results hand washing is recommended when applied to mugs, cups, and tumblers.
  • Dry application only

Application

Due to its special release characteristics, this film is ideal for use in short- to medium-term applications indoor, painted drywall surfaces.

important notice

All ORACAL® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORACAL® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORACAL® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

note

Extra precaution should be used when applying wall graphics to “Low VOC” or “Zero VOC” paints as these paints may exhibit lower adhesion levels. Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Disclaimer

The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.