Type “TG” Masking Material
Type “TG” Masking Material
This highly flexible, transparent grey film has been formulated for use in stencil applications, especially spray and paint techniques. It is ideal for complex water-based paint applications, low-saturation solvent-based paint applications and conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces.
SPECIFICATIONS
- Type: Non-Reusable
- Backing: Adhesive Backed
- Release Liner: 84# silicone coated paper
- Adhesive: Clear, water-based, low-tack, removable adhesive
- Thickness: 3 mil
- Color: Transparent grey
- Finish: Matte
- Minimum Temperature: 50°F
- Maximum Temperature: N/A
Features
- Flexible, translucent grey film has been formulated for use in stencil applications
- Excellent for conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces
- Ideal for complex water-based paint applications
Application
Developed for use in conformable paint stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the paint mask for substrate visibility.
Technical Tips
- Not suitable for wet applications.
- Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
- Users should always test their painting process to ensure stencil films are compatible.
- Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.
important notice
All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
note
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.
Disclaimer
The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.
This highly flexible, transparent grey film has been formulated for use in stencil applications, especially spray and paint techniques. It is ideal for complex water-based paint applications, low-saturation solvent-based paint applications and conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces.
SPECIFICATIONS
- Type: Non-Reusable
- Backing: Adhesive Backed
- Release Liner: 84# silicone coated paper
- Adhesive: Clear, water-based, low-tack, removable adhesive
- Thickness: 3 mil
- Color: Transparent grey
- Finish: Matte
- Minimum Temperature: 50°F
- Maximum Temperature: N/A
Features
- Flexible, translucent grey film has been formulated for use in stencil applications
- Excellent for conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces
- Ideal for complex water-based paint applications
Application
Developed for use in conformable paint stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the paint mask for substrate visibility.
Technical Tips
- Not suitable for wet applications.
- Remove the stencil film prior to baking, for those liquid paints that require baking to chemically cure.
- Users should always test their painting process to ensure stencil films are compatible.
- Stencil films may leave adhesive residue behind if left on a freshly painted or porous surface for too long.
important notice
All ORAMASK® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAMASK® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAMASK® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
note
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.
Disclaimer
The information contained herein is based on data taken from sources believed to be both current and accurate at the time of the preparation. All Orafol® brand Graphics sheeting products are defined as articles under the Occupational Safety and Health Administration Hazard Communication (29CRF 1910.1200(b)(6)(v)) for which Safety Data Sheets are not required. This information has been provided solely as a customer service and should not be considered legally binding in any way.
Enjoy this Mask Material, Like It…
Enjoy this Mask Material, Like It…
0 Likes
MANUFACTURER
ORAFOL® Americas Inc.
ORAFOL Americas - GA
ORAFOL Americas - CT
